Micro T2 1X20mm 2 Moa Red DOT Sight Reflex Sight with Riser Mount & Lens Cover Deep-Cutting Logo

Product Description

Micro T2 1X20mm 2 Moa Red DOT Sight Reflex Sight with Riser Mount & Lens Cover Deep-Cutting Logo

 

Product Overview

The Micro T2 1X20mm 2 MOA Red Dot Reflex Sight with Riser Mount, Lens Cover and Deep-Cutting Logo is a compact 1× optical sight designed for users seeking a precise red dot reticle, flexible mounting compatibility, practical viewing height, and a distinctive exterior appearance.

This version features a Deep-Cutting Logo and deeply marked body identification for a more pronounced and recognizable visual finish. The sight uses a fine 2 MOA red dot reticle and provides a total of 12 brightness settings, including 8 daylight levels, 2 low-light levels, and 2 NV-compatible levels, allowing flexible use across different lighting environments.

The optic features 0.5 MOA per click adjustment, a Micro-T2 15mm four-point mounting interface, an included riser mount, and a side-loading CR2032 battery compartment. Battery runtime reaches up to approximately 2,000 hours, depending on brightness setting and operating conditions.

With its anodized aluminum alloy housing, water-resistant and fog-resistant optical structure, and included lens cover, the Micro T2 provides a compact and practical reflex sight solution for indoor calibration, outdoor observation, low-light applications, and equipment display setups.

Features

• DEEP-CUTTING LOGO DESIGN - This version features a distinctive Deep-Cutting Logo and deeply marked body identification for a stronger and more recognizable exterior appearance.

• 2 MOA PRECISION RED DOT - The fine 2 MOA illuminated red dot provides a clean visual reference with minimal target obstruction.

• 12 BRIGHTNESS LEVELS - Provides a total of 12 brightness settings, including 8 daylight levels, 2 low-light levels, and 2 NV-compatible levels for different lighting environments.

• MICRO-T2 STANDARD MOUNTING INTERFACE - Uses a 15mm four-point Micro-T2 footprint for compatibility with common T2-style mounts, risers, and accessory systems.

• RISER MOUNT INCLUDED - The included raised mount provides a more comfortable viewing height for users wearing glasses, goggles, or additional equipment.

• 0.5 MOA PRECISION ADJUSTMENT - Each adjustment click equals 0.5 MOA for precise and repeatable windage and elevation correction.

• ±35 MOA ADJUSTMENT RANGE - Provides up to ±35 MOA of elevation and windage adjustment for flexible zeroing.

• 5M SHORT-DISTANCE ZEROING - Supports convenient indoor baseline calibration from approximately 5 meters.

• SIDE-LOADING CR2032 BATTERY - The battery can be replaced through the side compartment without removing the optic from the mount.

• UP TO 2,000-HOUR BATTERY LIFE - Provides up to approximately 2,000 hours of operating time depending on brightness level and usage conditions.

• ANODIZED ALUMINUM HOUSING - The aluminum alloy body provides a durable, wear-resistant, and lightweight structure.

• WATER-RESISTANT & FOG-RESISTANT DESIGN - The sealed optical structure helps protect internal components from moisture and changing environmental conditions.

• LENS COVER INCLUDED - Protective lens covers help reduce dust, scratches, and accidental contamination during transport or storage.

Product Parameters

Product Type	Micro Red Dot Reflex Sight	Magnification	1× Fixed
Objective Size	20 mm	Reticle Type	2 MOA Red Dot
Brightness Control	12 Levels (8 Daylight + 2 Low-Light + 2 NV-Compatible)	Adjustment Value	0.5 MOA / Click
Adjustment Range	±35 MOA Elevation / ±35 MOA Windage	Zeroing Distance	Approx. 5 m
Battery Type	CR2032	Battery Access	Side Loading
Battery Life	Up to Approx. 2,000 Hours	Mount Interface	Micro-T2 15mm Four-Point Footprint
Included Mount	Riser Mount	Housing Material	Anodized Aluminum Alloy
Marking Style	Deep-Cutting Logo	Optical Protection	Water Resistant / Fog Resistant
Included Accessories	Lens Cover	Surface Finish	Matte Black
Color	Black	Optical System	Reflex Optical System

 

Operation Guide

• POWER ON / OFF - Use the brightness control to activate the red dot and select the required illumination level.

• BRIGHTNESS ADJUSTMENT - Select from 12 total brightness levels according to the surrounding lighting conditions.

• DAYLIGHT MODE - Use the 8 daylight brightness settings for indoor and outdoor environments with normal to strong ambient light.

• LOW-LIGHT MODE - Use the 2 low-light settings in darker environments where softer reticle illumination is preferred.

• NIGHT VISION MODE - Use the 2 NV-compatible ultra-low brightness settings with compatible night vision equipment. These levels may be difficult to see with the unaided eye, which is normal.

• WINDAGE ADJUSTMENT - Rotate the windage control to correct horizontal alignment. Each click equals 0.5 MOA.

• ELEVATION ADJUSTMENT - Rotate the elevation control to correct vertical alignment. Each click equals 0.5 MOA.

• SHORT-DISTANCE ZEROING - Use the adjustment system to complete baseline calibration from approximately 5 meters.

• BATTERY INSTALLATION - Open the side battery compartment and install one CR2032 battery according to the polarity markings.

• BATTERY REPLACEMENT - Replace the battery through the side compartment without removing the optic from the installed mount.

• MOUNTING INSTALLATION - Install the optic using the Micro-T2 15mm four-point mounting interface or the included riser mount.

• MOUNTING CHECK - Inspect mounting screws and the riser connection periodically to ensure secure installation.

Suitable Users

• MICRO OPTIC USERS - Suitable for users seeking a compact and lightweight 1× red dot reflex sight.

• 2 MOA DOT USERS - Ideal for users who prefer a fine red dot with reduced visual obstruction.

• T2 FOOTPRINT USERS - Suitable for users requiring compatibility with common Micro-T2 mounting accessories and risers.

• GLASSES & GOGGLE USERS - The included riser mount provides a more comfortable viewing height for users wearing eyewear or protective equipment.

• DAYLIGHT & LOW-LIGHT USERS - The 12-level brightness system provides flexible illumination across bright, indoor, low-light, and NV-assisted environments.

• NIGHT VISION USERS - Two dedicated NV-compatible settings support compatible night vision equipment.

• INDOOR CALIBRATION USERS - Suitable for users requiring convenient short-distance calibration from approximately 5 meters.

• OUTDOOR OBSERVATION USERS - The aluminum housing and sealed optical structure support everyday outdoor use.

• COLLECTION & DISPLAY USERS - The Deep-Cutting Logo design provides a distinctive appearance for optical equipment collections and display setups.

Care & Maintenance

• LENS CLEANING - Use a clean microfiber lens cloth or professional optical cleaning material to remove fingerprints and surface contamination.

• DUST REMOVAL - Remove loose dust and debris with an air blower before wiping the lens surface.

• COATING PROTECTION - Avoid paper tissues, alcohol, aggressive solvents, and abrasive cleaners that may damage optical coatings.

• HOUSING CLEANING - Wipe the anodized aluminum housing with a soft dry cloth after use.

• MOISTURE CARE - Dry the exterior after exposure to rain, moisture, or humid conditions before storage.

• BATTERY MAINTENANCE - Remove the CR2032 battery during extended storage to reduce the risk of leakage and corrosion.

• BATTERY COMPARTMENT CARE - Keep battery contacts and the side cap clean and free from oxidation.

• MOUNT INSPECTION - Check the Micro-T2 interface, riser mount, and securing hardware periodically.

• LENS COVER USE - Keep the protective lens covers installed during transport or storage to reduce dust buildup and accidental scratches.

• STORAGE CONDITIONS - Store the optic in a cool, dry environment away from excessive heat, direct sunlight, and high humidity.

• DISASSEMBLY WARNING - Do not disassemble the internal optical or adjustment components, as this may affect alignment and sealing performance.

FAQ

1. Q: Can you do OEM or ODM?
A: Yes, we offer OEM & ODM. We can customize Logo & Slogan, as well as package and manual of the products. We can also make mold as per clients requests.

2. Q: How can you guarantee quality?
A: Always a pre-production sample before mass production;Always final Inspection before shipment.

3. Q: How long do i need to wait before my goods arrive?
A: It depends on the logistic type that you have selected, we offer UPS Express (1-2 business days), UPS Saver (2-3 business days), UPS Korea (7-9 business days)  and a variety of Ocean logistic services (11-30 business days). Usually it takes 5-35 business days for our clients to receive their goods after the order process is completed.

4. Q: What should we do if there is some problems with the products we bought from you?
A: At PETRAM we always send out sample product or examination videos before we begin mass production or before we start shipping. However, defects or errors may occur due to variety of reasons. Please contact us and point out exactly what the problem is and we will give our clients at least 2 options to choose from.

5. Q: Does package come with battery inside?
A: It depends on the battery type. Item that comes CR1632, CR2032, CR2450, CR123A or any other battery types that starts with "CR" will comes with battery inside. Batteries like AA or AAA, we most likely will not have the battery included due to logistic reasons. Except Walker's Ear Muff, those ear muffs comes with 2 AAA batteries. We will include batteries in Walker's Ear Muff.

6. Q: Do you provide samples?
A: Yes we offer samples with extra charge. We charge the price of the product and 10 USD for logistic fees, we will most likely send you the item via UPS, FEDEX or DHL.

7. Q: What are your terms of payment?
A: We only accept T/T at the moment.

8. Q: How can I track my order?
A: If you choose Ocean logistic service, we will provide you with a FEDEX or UPS tracking number on the day the order leaves port and tracking will update when order arrives at the designated port.If you choose Air logistic service, we will provide you with a UPS tracking number on the day the order gets on the plane and tracking will update within 1 business day.