|
Still deciding? Get samples of $ !
Request Sample
|
| Customization: | Available |
|---|---|
| Material: | Aluminium |
| Structure: | Reflex Sight |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
The ROMEO3 Base is a lightweight open reflex red dot sight designed around a large 25 mm low-distortion viewing window, compact 6061 aluminum construction, and a crisp 3 MOA red dot reticle. The open-window optical design provides a broad and unobstructed field of view for fast visual acquisition, while the multi-layer red reflective coating helps improve light transmission, clarity, and reticle contrast. Nine manually adjustable brightness settings provide flexible illumination across bright outdoor, indoor, and lower-light environments. A side-loading CR2032 battery compartment allows quick battery replacement without removing the optic, while the 1 MOA adjustment system and ±50 MOA windage and elevation travel support precise optical calibration. The standard 14 mm RMS-pattern mounting interface provides direct compatibility with appropriately configured mounting systems, and the included 0.8-inch quick-detach riser mount increases the installed optical height to approximately 1.4 inches for additional setup flexibility.
3 MOA RED DOT - The crisp 3 MOA red dot provides a practical balance between fast visual recognition and precise alignment.
25 MM LARGE VIEWING WINDOW - The low-distortion open window provides a wide and unobstructed field of view for rapid visual acquisition.
LIGHTWEIGHT 6061 ALUMINUM HOUSING - The compact aluminum body provides a strong yet lightweight structure for everyday and outdoor use.
MULTI-LAYER RED REFLECTIVE COATING - The optical lens uses a multi-layer red reflective coating designed to improve clarity, light transmission, and reticle contrast.
9 BRIGHTNESS SETTINGS - Nine manually selectable brightness levels provide flexible visibility across bright daylight, indoor, and lower-light conditions.
SIDE-LOADING CR2032 BATTERY - The side battery compartment allows convenient replacement without removing the optic or disturbing the established zero.
APPROX. 5,000-HOUR BATTERY LIFE - Provides extended operating time at medium brightness under specified conditions.
1 MOA PRECISION ADJUSTMENT - Each tactile adjustment click equals 1 MOA for simple and repeatable windage and elevation correction.
±50 MOA ADJUSTMENT RANGE - Windage and elevation each provide up to ±50 MOA of travel for flexible calibration.
RMS-PATTERN MOUNTING INTERFACE - The standard 14 mm RMS-pattern interface supports direct installation on compatible mounting systems.
6-METER SHORT-DISTANCE CALIBRATION - Supports indoor baseline calibration from approximately 6 meters under suitable setup conditions.
QD RISER MOUNT INCLUDED - The included 0.8-inch quick-detach riser mount increases the installed optical height to approximately 1.4 inches.
| Product Type | Open Reflex Red Dot Sight | Viewing Window | 25 mm Low-Distortion Open Window |
| Magnification | 1× | Brightness Settings | 9 Levels |
| Reticle | 3 MOA Red Dot | Battery Life | Approx. 5,000 Hours at Medium Brightness |
| Battery Type | CR2032 | Lens Coating | Multi-Layer Red Reflective Coating |
| Battery Location | Side Loading | Overall Length | Approx. 59 mm / 2.32 in |
| Adjustment per Click | 1 Click = 1 MOA | Overall Height | Approx. 41 mm / 1.61 in |
| Windage / Elevation Range | ±50 MOA / ±50 MOA | Included Riser Height | Approx. 0.8 in / 20.3 mm |
| Housing Material | 6061 Aluminum | Installed Optical Height | Approx. 1.4 in / 35.6 mm |
ENTRY-LEVEL OPTICS USERS - Ideal for users seeking a lightweight, straightforward 1x red dot sight with simple brightness and adjustment controls.
FAST-ACQUISITION USERS - The 25 mm open window and 3 MOA dot provide a clear and intuitive visual reference.
SPORT & RECREATIONAL USERS - Suitable for users seeking a compact reflex sight with adjustable brightness and easy battery access.
INDOOR CALIBRATION USERS - Suitable for users who need short-distance indoor calibration from approximately 6 meters.
RMS-FOOTPRINT USERS - Designed for users with compatible 14 mm RMS-pattern mounting systems.
LIGHTWEIGHT SETUP USERS - The compact aluminum housing is suitable for users who prioritize reduced size and weight.
LENS CLEANING - Remove loose dust and debris with a soft lens brush or air blower before gently wiping the lens with a microfiber cloth.
PROTECT OPTICAL COATINGS - Avoid paper towels, abrasive materials, alcohol, organic solvents, or aggressive chemicals that may damage the multi-layer coating.
BODY CLEANING - Wipe the aluminum housing with a clean soft cloth after use to remove dust, moisture, and contaminants.
BATTERY CARE - Check the CR2032 battery periodically and remove it before extended storage to reduce the risk of leakage.
MOUNT INSPECTION - Periodically inspect the RMS interface, QD riser, and mounting hardware to ensure secure installation.
ADJUSTMENT CARE - Keep windage and elevation controls clean and free from dirt, sand, and debris.
KEEP DRY - After exposure to moisture, wipe the optic dry and allow it to fully air-dry before storage.
PROPER STORAGE - Store the optic in a clean, dry environment away from excessive humidity, corrosive substances, and prolonged direct sunlight.
1. Q: Can you do OEM or ODM?
A: Yes, we offer OEM & ODM. We can customize Logo & Slogan, as well as package and manual of the products. We can also make mold as per clients requests.
2. Q: How can you guarantee quality?
A: Always a pre-production sample before mass production;Always final Inspection before shipment.
3. Q: How long do i need to wait before my goods arrive?
A: It depends on the logistic type that you have selected, we offer UPS Express (1-2 business days), UPS Saver (2-3 business days), UPS Korea (7-9 business days) and a variety of Ocean logistic services (11-30 business days). Usually it takes 5-35 business days for our clients to receive their goods after the order process is completed.
4. Q: What should we do if there is some problems with the products we bought from you?
A: At PETRAM we always send out sample product or examination videos before we begin mass production or before we start shipping. However, defects or errors may occur due to variety of reasons. Please contact us and point out exactly what the problem is and we will give our clients at least 2 options to choose from.
5. Q: Does package come with battery inside?
A: It depends on the battery type. Item that comes CR1632, CR2032, CR2450, CR123A or any other battery types that starts with "CR" will comes with battery inside. Batteries like AA or AAA, we most likely will not have the battery included due to logistic reasons. Except Walker's Ear Muff, those ear muffs comes with 2 AAA batteries. We will include batteries in Walker's Ear Muff.
6. Q: Do you provide samples?
A: Yes we offer samples with extra charge. We charge the price of the product and 10 USD for logistic fees, we will most likely send you the item via UPS, FEDEX or DHL.
7. Q: What are your terms of payment?
A: We only accept T/T at the moment.
8. Q: How can I track my order?
A: If you choose Ocean logistic service, we will provide you with a FEDEX or UPS tracking number on the day the order leaves port and tracking will update when order arrives at the designated port.If you choose Air logistic service, we will provide you with a UPS tracking number on the day the order gets on the plane and tracking will update within 1 business day.
){kind=link}